View STP25N10F7_8885013.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

this is information on a product in full production. september 2013 docid025265 rev 1 1/21 std25n10f7, stf25n10f7, STP25N10F7 n-channel 100 v, 0.027 ? typ., 25 a, stripfet? vii deepgate? power mosfet in dpak, to-220fp and to-220 packages datasheet - production data figure 1. internal schematic diagram features ? ultra low on-resistance ? 100% avalanche tested applications ? switching applications description these devices utilize the 7 th generation of design rules of st?s proprietary stripfet? technology, with a new gate structure. the resulting power mosfet exhibits the lowest r ds(on) in all packages. 1 2 3 ta b ta b 1 2 3 dpak to-220fp to-220 $0y '7$% * 6 order codes v dss r ds(on) max. (1) 1. @ v gs = 10 v i d p tot std25n10f7 100 v 0.035 25 a 40 w stf25n10f7 100 v 0.035 19 a 25 w STP25N10F7 100 v 0.035 25 a 50 w table 1. device summary order codes marking package packaging std25n10f7 25n10f7 dpak tape and reel stf25n10f7 25n10f7 to-220fp tube STP25N10F7 25n10f7 to-220 tube www.st.com
contents std25n10f7, stf25n10f7, STP25N10F7 2/21 docid025265 rev 1 contents 1 electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 3 test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 4 package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 5 packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 6 revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
docid025265 rev 1 3/21 std25n10f7, stf25n10f7, STP25N10F7 electrical ratings 21 1 electrical ratings table 2. absolute maximum ratings symbol parameter value unit dpak to-220 to-220fp v ds drain-source voltage 100 v v gs gate-source voltage 20 v i d (1) 1. this value is rated according to r thj-c . drain current (continuous) at t c = 25 c 25 25 19 a i d (1) drain current (continuous) at t c = 100 c 18 18 13.5 a i dm (2) 2. pulse width limited by safe operating area. drain current (pulsed) 100 100 76 a p tot (1) total dissipation at t c = 25 c 40 50 25 w v iso insulation withstand voltage (rms) from all three leads to external heat sink (t = 1 s; t c = 25 c) -2500v t j operating junction temperature -55 to 175 c t stg storage temperature c table 3. thermal resistance symbol parameter value unit dpak to-220fp to-220 r thj-case thermal resistance junction-case 3.75 6 3 c/w r thj-amb thermal resistance junction-ambient 62.5 c/w r thj-pcb thermal resistance junction-pcb 50 c/w
electrical characteristics std25n10f7, stf25n10f7, STP25N10F7 4/21 docid025265 rev 1 2 electrical characteristics (t case = 25 c unless otherwise specified) table 4. on/off states symbol parameter test conditions min. typ. max. unit v (br)dss drain-source breakdown voltage (v gs = 0) i d = 250 a 100 - v i dss zero gate voltage drain current (v gs = 0) v ds = 100 v v ds = 100 v; t c = 125 c 10 100 a a i gss gate body leakage current (v ds = 0) v gs = 20 v 100 na v gs(th) gate threshold voltage v ds = v gs , i d = 250 a2.5 4.5v r ds(on) static drain-source on- resistance v gs = 10 v, i d = 12.5 a 0.027 0.035 table 5. dynamic symbol parameter test conditions min. typ. max. unit c iss input capacitance v ds = 50 v, f = 1 mhz, v gs = 0 -920 - pf c oss output capacitance - 215 - pf c rss reverse transfer capacitance -19 - pf q g total gate charge v dd = 50 v, i d = 25 a v gs = 10 v figure 18 -14 - nc q gs gate-source charge - 7 - nc q gd gate-drain charge - 3 - nc
docid025265 rev 1 5/21 std25n10f7, stf25n10f7, STP25N10F7 electrical characteristics 21 table 6. switching times symbol parameter test conditions min. typ. max. unit t d(on) turn-on delay time v dd = 50 v, i d = 12.5 a, r g = 4.7 , v gs = 10 v figure 17 -9.8 - ns t r rise time - 14 - ns t d(off) turn-off delay time - 14.8 - ns t f fall time - 4.6 - ns table 7. source-drain diode symbol parameter test conditions min. typ. max. unit i sd source-drain current - 25 a i sdm (1) 1. pulse width limited by safe operating area. source-drain current (pulsed) - 100 a v sd (2) 2. pulsed: pulse duration = 300 s, duty cycle 1.5%. forward on voltage i sd = 25 a, v gs = 0 - 1.1 v t rr reverse recovery time i sd = 25 a, di/dt = 100 a/ s, v dd = 80 v, t j = 150 c -38 ns q rr reverse recovery charge - 29 nc i rrm reverse recovery current - 1.7 a
electrical characteristics std25n10f7, stf25n10f7, STP25N10F7 6/21 docid025265 rev 1 2.1 electrical characteristics (curves) figure 2. safe operating area for dpak figure 3. thermal impedance for dpak i d 100 10 1 0.1 0.1 1 v ds (v) 10 (a) operation in this area is limited by max r ds(on) 100s 1ms 10ms tj=150c tc=25c single pulse 0.01 am16006v1 single pulse 0.05 0.02 0.01 =0.5 0.2 0.1 k 10 t p (s) -5 10 -4 10 10 10 10 -1 10 -6 10 -2 -3 -2 -1 am16024v1 figure 4. safe operating area for to-220fp figure 5. thermal impedance for to-220fp i d 10 1 0.1 1 v ds (v) 10 (a) operation in this area is limited by max r ds(on) 100s 1ms 10ms tj=150c tc=25c single pulse 0.1 am16022v1 single pulse 0.05 0.02 0.01 =0.5 0.2 0.1 k 10 t p (s) -5 10 -4 10 10 10 -1 10 -6 10 -2 -3 -2 10 -1 am16025v1 figure 6. safe operating area for to-220 figure 7. thermal impedance for to-220 i d 1 0.1 0.1 1 v ds (v) 10 (a) operation in this area is limited by max r ds(on) 100s 1ms 10ms tj=150c tc=25c single pulse 0.01 10 100 am16023v1 single pulse 0.05 0.02 0.01 =0.5 0.2 0.1 k 10 t p (s) -5 10 -4 10 10 10 -1 10 -6 10 -2 -3 -2 10 -1 am16026v1
docid025265 rev 1 7/21 std25n10f7, stf25n10f7, STP25N10F7 electrical characteristics 21 figure 8. output characteristics figure 9. transfer characteristics figure 10. gate charge vs gate-source voltage figure 11. static drain-source on-resistance figure 12. capacitance variations figure 13. normalized gate threshold voltage vs temperature i d 60 40 20 0 0 v ds (v) (a) 5 80 5v 6v v gs =10v 70 50 30 10 7v 8v 9v 1 2 3 4 6 78 am16008v1 i d 60 40 20 0 3 v gs (v) 5 (a) 2 4 80 10 30 50 70 v ds =6v 6 7 8 9 10 11 am16009v1 v gs 6 4 2 0 0 5 q g (nc) (v) 8 10 15 10 v dd =50v i d =25a 12 am16010v1 r ds(on) 30.0 20.0 10.0 0.0 0 20 i d (a) ( m ) 10 40.0 0.096 v gs =10v 5 15 am16011v1 c 600 400 200 0 0 20 v ds (v) (pf) 10 800 30 ciss coss crss 40 50 60 70 80 1000 am16012v1 v gs(th) 0.8 0.7 0.6 0.5 -55 -5 t j (c) (norm) -30 0.9 70 20 45 95 i d =250a 0.4 120 1 1.1 am16013v1
electrical characteristics std25n10f7, stf25n10f7, STP25N10F7 8/21 docid025265 rev 1 figure 14. normalized on-resistance vs temperature figure 15. normalized b vdss vs temperature figure 16. source-drain diode forward characteristics r ds(on) 2 1.5 0.5 0 t j (c) (norm) i d =12.5a 1 -55 -5 -30 70 20 45 95 120 am16014v1 v ds t j (c) (norm) 0.96 0.98 1 1.02 i d =250a -55 -5 -30 70 20 45 95 120 1.04 am16015v1 v sd 0 10 i sd (a) (v) 5 25 15 20 0.7 0.8 0.9 1 t j =-50c t j =150c t j =25c 1.1 0.6 am16016v1
docid025265 rev 1 9/21 std25n10f7, stf25n10f7, STP25N10F7 test circuits 21 3 test circuits figure 17. switching times test circuit for resistive load figure 18. gate charge test circuit figure 19. test circuit for inductive load switching and diode recovery times figure 20. unclamped inductive load test circuit figure 21. unclamped inductive waveform figure 22. switching time waveform am01468v1 v gs p w v d r g r l d.u.t. 2200 f 3.3 f v dd am01469v1 v dd 47k 1k 47k 2.7k 1k 12v v i =20v=v gmax 2200 f p w i g =const 100 100nf d.u.t. v g am01470v1 a d d.u.t. s b g 25 a a b b r g g fast diode d s l=100 h f 3.3 1000 f v dd am01471v1 v i p w v d i d d.u.t. l 2200 f 3.3 f v dd am01472v1 v (br)dss v dd v dd v d i dm i d am01473v1 v ds t on td on td off t off t f t r 90% 10% 10% 0 0 90% 90% 10% v gs
package mechanical data std25n10f7, stf25n10f7, STP25N10F7 10/21 docid025265 rev 1 4 package mechanical data in order to meet environmental requirements, st offers these devices in different grades of ecopack ? packages, depending on their level of environmental compliance. ecopack ? specifications, grade definitions and product status are available at: www.st.com . ecopack ? is an st trademark.
docid025265 rev 1 11/21 std25n10f7, stf25n10f7, STP25N10F7 package mechanical data 21 table 8. dpak (to-252) mechanical data dim. mm min. typ. max. a 2.20 2.40 a1 0.90 1.10 a2 0.03 0.23 b 0.64 0.90 b4 5.20 5.40 c 0.45 0.60 c2 0.48 0.60 d 6.00 6.20 d1 5.10 e 6.40 6.60 e1 4.70 e2.28 e1 4.40 4.60 h9.35 10.10 l 1.00 1.50 (l1) 2.80 l2 0.80 l4 0.60 1.00 r0.20 v2 0 8
package mechanical data std25n10f7, stf25n10f7, STP25N10F7 12/21 docid025265 rev 1 figure 23. dpak (to-252) drawings 0068772_k
docid025265 rev 1 13/21 std25n10f7, stf25n10f7, STP25N10F7 package mechanical data 21 figure 24. dpak footprint (a) a. all dimensions are in millimeters footprint_rev_k
package mechanical data std25n10f7, stf25n10f7, STP25N10F7 14/21 docid025265 rev 1 table 9. to-220fp mechanical data dim. mm min. typ. max. a4.4 4.6 b2.5 2.7 d 2.5 2.75 e 0.45 0.7 f0.75 1 f1 1.15 1.70 f2 1.15 1.70 g 4.95 5.2 g1 2.4 2.7 h 10 10.4 l2 16 l3 28.6 30.6 l4 9.8 10.6 l5 2.9 3.6 l6 15.9 16.4 l7 9 9.3 dia 3 3.2
docid025265 rev 1 15/21 std25n10f7, stf25n10f7, STP25N10F7 package mechanical data 21 figure 25. to-220fp drawing 7012510_rev_k_b
package mechanical data std25n10f7, stf25n10f7, STP25N10F7 16/21 docid025265 rev 1 table 10. to-220 type a mechanical data dim. mm min. typ. max. a 4.40 4.60 b 0.61 0.88 b1 1.14 1.70 c 0.48 0.70 d 15.25 15.75 d1 1.27 e 10 10.40 e 2.40 2.70 e1 4.95 5.15 f 1.23 1.32 h1 6.20 6.60 j1 2.40 2.72 l13 14 l1 3.50 3.93 l20 16.40 l30 28.90 ? p 3.75 3.85 q 2.65 2.95
docid025265 rev 1 17/21 std25n10f7, stf25n10f7, STP25N10F7 package mechanical data 21 figure 26. to-220 type a drawings 0015988_typea_rev_s
packaging mechanical data std25n10f7, stf25n10f7, STP25N10F7 18/21 docid025265 rev 1 5 packaging mechanical data table 11. dpak (to-252) tape and reel mechanical data tape reel dim. mm dim. mm min. max. min. max. a0 6.8 7 a 330 b0 10.4 10.6 b 1.5 b1 12.1 c 12.8 13.2 d 1.5 1.6 d 20.2 d1 1.5 g 16.4 18.4 e1.65 1.85n 50 f 7.4 7.6 t 22.4 k0 2.55 2.75 p0 3.9 4.1 base qty. 2500 p1 7.9 8.1 bulk qty. 2500 p2 1.9 2.1 r40 t0.25 0.35 w15.7 16.3
docid025265 rev 1 19/21 std25n10f7, stf25n10f7, STP25N10F7 packaging mechanical data 21 figure 27. tape for dpak (to-252) figure 28. reel for dpak (to-252) p1 a0 d1 p0 f w e d b0 k0 t user direction of feed p2 10 pitches cumulative tolerance on tape +/- 0.2 mm user direction of feed r bending radius b1 for machine ref. only including draft and radii concentric around b0 am08852v1 top cover tape a d b full radius g measured at hub c n reel dimensions 40mm min. access hole at slot location t tape slot in core for tape start 25 mm min. width am08851v2
revision history std25n10f7, stf25n10f7, STP25N10F7 20/21 docid025265 rev 1 6 revision history table 12. document revision history date revision changes 17-sep-2013 1 first release.
docid025265 rev 1 21/21 std25n10f7, stf25n10f7, STP25N10F7 21 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a particular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. st products are not authorized for use in weapons. nor are st products designed or authorized for use in: (a) safety critical applications such as life supporting, active implanted devices or systems with product functional safety requirements; (b) aeronautic applications; (c) automotive applications or environments, and/or (d) aerospace applications or environments. where st products are not designed for such use, the purchaser shall use products at purchaser?s sole risk, even if st has been informed in writing of such usage, unless a product is expressly designated by st as being intended for ?automotive, automotive safety or medical? industry domains according to st product design specifications. products formally escc, qml or jan qualified are deemed suitable for use in aerospace by the corresponding governmental agency. resale of st products with provisions different from the statem ents and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or register ed trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2013 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - philippines - singapore - spain - swed en - switzerland - united kingdom - united states of america www.st.com

▲Up To Search▲

Price & Availability of STP25N10F7

	To Download STP25N10F7 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .